Victron Smart BMS 12/100
De Smart BMS CL 12/100 is een accubeheersysteem voor Victron lithium-ijzer-fosfaat (LiFePO4) Smart-accu's. Het is specifiek ontworpen voor 12V-systemen met een 12V-alternator. Dit geavanceerde systeem biedt essentiële controle en bescherming voor elke individuele accucel binnen de accu (of accubank). Het systeem zorgt ervoor dat de alternator, oplaadbronnen of DC-ladingen worden ontkoppeld bij laagspanning, hoogspanning of overtemperatuur.
Specification | Details |
Product Name | Smart BMS CL 12V 100A BMS110022000 |
Alternator Port - Max Charge Current | 100 A (with 125 A fuse) |
Input Voltage to Start Charging | > 13 V |
Current Consumption, Remote On | 16 mA (excluding Load output and Charge output current) |
Current Consumption, Remote Off | 5 mA (BMS functionality still active) |
Load Disconnect Output |
|
- State | Normally high (Vbat – 0.1 V) |
- Source Current Limit | 10 mA (short circuit protected) |
- Sink Current | 0 A (output free floating) |
Charge Disconnect Output |
|
- State | Normally high (Vbat – 0.1 V) |
- Source Current Limit | 10 mA (short circuit protected) |
- Sink Current | 0 A (output free floating) |
Pre-Alarm Output |
|
- State | Normally free floating |
- High | (Vbat) in case of alarm, max. 1 A (not short circuit proof) |
Remote (or System) On/Off |
|
- Remote L and Remote H | Use modes of the system on/off: |
- Mode 1 | ON when the L and H terminal are interconnected |
- Mode 2 | ON when the L terminal is pulled to battery minus (V< 5 V) |
- Mode 3 | ON when the H terminal is high (V>3 V) |
- Mode 4 | OFF in all other conditions |
General |
|
- Operating Temperature Range | -40 °C to +60 °C |
- Humidity, Maximum / Average | 100 % / 95 % |
- Protection, Electronics | IP65 |
- DC Power Connection | M8 (mounting torque: 10 Nm) |
- DC Connector Battery Minus | Faston female, 6.3 mm |
Enclosure |
|
- Weight | 1.6 kg |
- Dimensions (HxWxD) | 65 x 120 x 224 mm |