VE.Bus BMS V2 Victron
€ 166,00Prijs
De VE.Bus BMS en VE.Bus BMS V2 zijn geavanceerde accubeheersystemen (BMS) ontworpen voor de bescherming en optimalisatie van één of meerdere Lithium Battery Smart 12,8 V & 25,6 V-accu's (LiFePO4 of LFP). Deze systemen zijn ideaal voor gebruik in combinatie met Victron omvormers of omvormer/laders die uitgerust zijn met VE.Bus-communicatie.
| Parameter | Specification |
|---|---|
| Input voltage range | 9 – 70 VDC |
| Current draw - regular operation | 10 mA (excluding Load disconnect current) |
| Current draw - low cell voltage | 2 mA |
| Current draw - switched off | 1.50 mA |
| GX-pow output | 1 A |
| Aux-in input | 1 A |
| Load disconnect output | Normally high (output voltage ≈ supply voltage – 1 V)<br>Floating when the load needs to be disconnected<br>Source current limit: 1 A<br>Sink current: 0 A |
| Charge disconnect output | Normally high (output voltage ≈ supply voltage – 1 V)<br>Floating when charger should be disconnected<br>Source current limit: 10 mA<br>Sink current: 0 A |
| Pre-alarm output current rating | 1 A, not short circuit protected |
| Remote terminals usage modes | a) ON when the L and H terminal are interconnected (switch or relay contact)<br>b) ON when the L terminal is pulled to battery minus (V<3.5 V)<br>c) ON when the H terminal is high (2.9 V < VH < Vbat)<br>d) OFF in all other conditions |
| VE.Bus communication port | 2 x RJ45 sockets to connect to all VE.Bus products |
| Operating temperature | -20 to +50 °C (0 – 120 °F) |
| Humidity | Max. 95 % (non-condensing) |
| Protection grade | IP20 |
| Enclosure material | ABS |
| Enclosure colour | Matt black with a blue sticker |
| Weight | 120 gr |
| Dimensions (h x w x d) | 23.8 mm x 94.5 mm x 105.5 mm |
| Standards | Safety: EN 60950<br>Emission: EN 61000-6-3, EN 55014-1<br>Immunity: EN 61000-6-2, EN 61000-6-1, EN 55014-2<br>Automotive: EN 50498 |
Nog geen beoordelingenDeel je mening.
Wees de eerste die een beoordeling achterlaat.